Viewing 15 posts - 1 through 15 (of 15 total)
Hi Kevin
Thanks for your reply, its doing nothing but in the event log its written below
Fault bucket , type 0
Event Name: CLR20r3
Response: Not available
Cab Id: 0
Problem signature:
P1: myservice.exe
November 17, 2016 at 9:29 am
Hi
Is your problem resolved, if yes can you please share the solution i am under same situation now
Thanks
September 29, 2016 at 2:28 pm
Tweaked a bit to suit my requirement and it worked. Thank you Luis Cazares
July 19, 2016 at 7:05 am
Thank you for the quick reply. Yes B is the parent of C. The level column should populate in a view/proc dynamically. I achieved using multiple queries for each level,...
July 18, 2016 at 1:30 pm
I used "_0x0044", then it is taking column delimiter as "Mixed" and all the columns are considering as one column. This is not only the migration. I have created a...
July 8, 2016 at 12:40 pm
I agree with you, it used to work, recently we have added a column to the temp table in prod env, then it is giving the exception, will work on...
December 22, 2014 at 6:59 am
Yes, actually the inner procedure is inserting the procedure1 output into a temporary table 1 and again the procedure2 is trying to insert the resultset into temporary table 2, so...
December 22, 2014 at 6:23 am
Hi
Thanks for your reply, yes RAISERROR statement is there at that particular statement but how can i overcome this issue
Thanks
John
December 22, 2014 at 2:27 am
Thanks for your quick replies, nice article shared by Alan.B, yes obsolutely it depends, now we are developing a new database just wanted to check going forward (if data...
February 12, 2014 at 1:09 am
Yeah, Thanks. it's worked,we should change the server name.
Thanks for sharing.
February 5, 2014 at 12:52 am
Hi
I am trying to auto dump the database, as i was ended up with the below error, can you please advise on this.
The following exception was thrown when trying to...
February 3, 2014 at 8:13 pm
yes i tried the same as this. if i try it from command prompt it is ending up with an error
HResult 0x35, Level 16, State 1
Named Pipes Provider: Could...
November 16, 2012 at 5:53 am
Thanks for your reply, I have tried it but no joy, i just wondering do we have anything to do with windows authentication/permissions?
i have give as below
SQLCMD -S servername -U...
November 16, 2012 at 5:39 am
Thanks i did not configured the variable correctly but now it works
Thanks for your reply
Regards
venky
January 18, 2012 at 4:32 am
Viewing 15 posts - 1 through 15 (of 15 total)