May 23, 2011 at 3:49 am
Hi,
This previously worked but I've ask the infra guys to rebuild the 2 servers for me as I was seeing various dll error in a 2 node cluster.
Upon rebuilt and running validation test it constantly comes up with Validate SCSI-3 Persistent Reservation
and fails at Successfully put PR reserve on cluster disk 0 from node 1 while it should have failed
These are on 2 vms and they have been previously allocated before being rebuilt. I've gone through quite a lot of documents on the net and tried clearing disk and pr and still no luck!
Any advice much appreciated.
May 23, 2011 at 11:13 pm
OS Version ?
Storage brand and Version ?
http://communities.vmware.com/thread/250699
Regards,
Syed Jahanzaib Bin Hassan
BSCS | MCTS | MCITP | OCA | OCP | OCE | SCJP | IBMCDBA
My Blog
www.aureus-salah.com
May 24, 2011 at 2:59 am
Hi,
I have already been down that route and still no success. I suspect it is still storage issues but they are telling me it's an os! This has previously worked and all we did was rebuilt the cluster again and re-assigned same luns which were previously assigned and were working ok. I've run quite a few cluster commands and still the same error over and over!
May 25, 2011 at 8:27 am
I had this issue with a SAN I was using. The engineer I worked with found that a new "firmware" update was available, he applied it and a new Windows 2008 option was availble. We selected this and the validation worked.
I didnt see it so I dont know what the option was. I'm pretty sure it was a HP san.
May 26, 2011 at 3:02 am
Hi,
This issue is now resolved. I sat with the engineer and it worked out that the vms were on the same hosts even though they assured me that this wasn't the case! All ok now.
Viewing 5 posts - 1 through 4 (of 4 total)
You must be logged in to reply to this topic. Login to reply