December 21, 2007 at 11:54 am
I have a complex store procedure and I need print of output from store procedure that's why i am declaring couple of variables to assign queries to variables and then to take a print at end of store procedure. I just need to debug store procedure that's why i am doing this because i can't debug by using Visual Studio. can any body help me. I am not good enough with SQL Server.:w00t:
December 21, 2007 at 12:09 pm
I am not sure what you want to see... Or what help you need. You say it is complex. So why not just copy the body of the Stored proc into the analyzer and set the values to the variables and then do all the debugging you want. You have more control over it. You could comment out parts and execute just some statements.
Just my 2 cents
-Roy
December 21, 2007 at 12:13 pm
Are you getting any errors when you run the stored procedure? or is the problem that you are not getting the results you expect or no results at all?
I normally debug more complex procedures by commenting out all but a small section of the procedure and then running it and if it works enable the next section.
If you post the procedure it will be easier to help.
Jack Corbett
Consultant - Straight Path Solutions
Check out these links on how to get faster and more accurate answers:
Forum Etiquette: How to post data/code on a forum to get the best help
Need an Answer? Actually, No ... You Need a Question
December 21, 2007 at 1:55 pm
hmmm.... I need only output query out of it to execute the query and debug accordingly.
ALTER PROCEDURE test]
(
@GroupID int,
@IsPortfolioManager bit = 1,
@Username varchar(20) = NULL,
@Debug bit=0
)
AS
-- Get the GroupType for this Group
DECLARE @GroupType smallint
DECLARE @SQL1 varchar(8000)
DECLARE @SQL2 varchar(8000)
DECLARE @SQL3 varchar(8000)
DECLARE @SQL4 varchar(8000)
DECLARE @SQL5 varchar(8000)
DECLARE @SQL6 varchar(8000)
SET @SQL1 = ''
SET @SQL2 = ''
SET @SQL3 = ''
SET @SQL4 = ''
SET @SQL5 = ''
SET @SQL6 = ''
SET @GroupType = ( SELECT GroupType FROM PortfolioManager.dbo.GroupInfo WHERE GroupID = @GroupID )
IF @Username IS NOT NULL
BEGIN
DECLARE @FirmID smallint
SET @FirmID = ( SELECT FirmParameterID FROM ASAT.dbo.UserInformation WHERE Username = @Username )
-- Create a temp table containing the specified user's rep list
DECLARE @reps
TABLE (RepID char(4) PRIMARY KEY)
-- Populate the temp rep table
INSERT INTO @reps
SELECT DISTINCT
rl.RepID
FROM
ASAT..RepList rl WITH (NOLOCK)
LEFT JOIN Rep..BS_REP_INFO ri WITH (NOLOCK) ON rl.RepID = ri.REP_ID
WHERE
rl.username = @Username AND
rl.replisttype = 'BP'
IF @GroupType IN (1,2,4)
BEGIN
-- 1 Deep (All group types)
set @SQL1='SELECT
acc.AccountId,
acc.AccountLocationCode,
loc.AccountLocationShortName,
acc.RepId,
acc.AccountNo,
acc.SponsorAccountNo,
(CASE WHEN acc.AccountLocationCode IN (1, 2) THEN acc.AccountNo ELSE acc.SponsorAccountNo END) AS AccountNo,
(CASE WHEN acc.AccountLocationCode IN (1, 2) THEN SUBSTRING(acc.AccountNo, 1, 4) + ''-'' + SUBSTRING(acc.AccountNo, 5, 4) ELSE acc.SponsorAccountNo END) AS AccountNoDisplay,
(CASE WHEN acc.AccountLocationCode IN (1, 2) THEN acls.ShortName ELSE mfvs.SponsorName END) AS AccountClassOrFamily,
(CASE WHEN acc.AccountLocationCode IN (1, 2) THEN acc.AccountClassCode ELSE acc.SponsorCode END) AS AccountClassOrFamilyCode,
acc.SponsorCode,
acc.Cusip,
acc.ProductName,
acc.SSNTaxId,
acc.IsSSN,
acc.PrimaryBirthDate,
acc.AccountName,
acc.AccountTitle,
acc.IsClosed,
acc.TotalAccountValue,
acc.AccountValue,
acc.OutsideAccountValue,
(CASE WHEN acc.AccountLocationCode IN (1,2) THEN acc.AccountValue WHEN acc.AccountLocationCode = 16 THEN acc.OutsideAccountValue ELSE acc.TotalAccountValue END) AS AccountValue,
(CASE WHEN acc.AccountLocationCode IN (1,2) THEN acc.OutsideAccountValue ELSE 0 END) AS NetworkedValue,
acc.NetworkedAccountID,
(CASE WHEN acls.MFTradingEligible = ''Y'' AND RTRIM(acc.AccountClassCode) NOT LIKE ''%IS'' THEN ''Y'' ELSE ''N'' END) AS MFTradingEligible,
acls.EquityTradingEligible,
acls.OptionTradingEligible,
acls.FixedIncomeTradingEligible,
''Account'' AS MemberType
FROM
PortfolioManager.dbo.AccountMember am
INNER JOIN Customer.dbo.Account acc ON am.AccountId = acc.AccountId AND am.AccountLocationCode = acc.AccountLocationCode
INNER JOIN @reps reps ON acc.RepID = reps.RepID
INNER JOIN Customer.dbo.AccountLocation loc ON am.AccountLocationCode = loc.AccountLocationCode
LEFT JOIN Support.dbo.AccountClass acls ON acc.AccountClassCode = acls.Code
LEFT JOIN Customer.dbo.MFVASponsor mfvs ON acc.SponsorCode = mfvs.SponsorCode AND acc.SponsorType = mfvs.SponsorType
WHERE
am.GroupID = @GroupID
AND (@IsPortfolioManager = 1 OR acc.AccountLocationCode <> 16)
AND (@FirmID = 1 OR acc.AccountLocationCode IN (1,2))
AND (acc.AccountLocationCode NOT IN (4, 128, 2048) OR acc.suppress IS NULL OR acc.suppress = 0)'
END
-- If records were found, return immediately
IF @@ROWCOUNT > 0 RETURN 1
IF @FirmID = 1
BEGIN
-- 2 Deep (Household only - User Defined groups are handled below)
IF @GroupType = 2
BEGIN
set @SQL2=
'SELECT
acc.AccountId,
acc.AccountLocationCode,
loc.AccountLocationShortName,
acc.RepId,
acc.AccountNo,
acc.SponsorAccountNo,
(CASE WHEN acc.AccountLocationCode IN (1, 2) THEN acc.AccountNo ELSE acc.SponsorAccountNo END) AS AccountNo,
(CASE WHEN acc.AccountLocationCode IN (1, 2) THEN SUBSTRING(acc.AccountNo, 1, 4) + ''-'' + SUBSTRING(acc.AccountNo, 5, 4) ELSE acc.SponsorAccountNo END) AS AccountNoDisplay,
(CASE WHEN acc.AccountLocationCode IN (1, 2) THEN acls.ShortName ELSE mfvs.SponsorName END) AS AccountClassOrFamily,
(CASE WHEN acc.AccountLocationCode IN (1, 2) THEN acc.AccountClassCode ELSE acc.SponsorCode END) AS AccountClassOrFamilyCode,
acc.SponsorCode,
acc.Cusip,
acc.ProductName,
acc.SSNTaxId,
acc.IsSSN,
acc.PrimaryBirthDate,
acc.AccountName,
acc.AccountTitle,
acc.IsClosed,
acc.TotalAccountValue,
acc.AccountValue,
acc.OutsideAccountValue,
(CASE WHEN acc.AccountLocationCode IN (1,2) THEN acc.AccountValue WHEN acc.AccountLocationCode = 16 THEN acc.OutsideAccountValue ELSE acc.TotalAccountValue END) AS AccountValue,
(CASE WHEN acc.AccountLocationCode IN (1,2) THEN acc.OutsideAccountValue ELSE 0 END) AS NetworkedValue,
acc.NetworkedAccountID,
(CASE WHEN acls.MFTradingEligible = ''Y'' AND RTRIM(acc.AccountClassCode) NOT LIKE ''%IS'' THEN ''Y'' ELSE ''N'' END) AS MFTradingEligible,
acls.EquityTradingEligible,
acls.OptionTradingEligible,
acls.FixedIncomeTradingEligible,
gt.Description AS MemberType
FROM
PortfolioManager.dbo.GroupMember gm
INNER JOIN PortfolioManager.dbo.GroupInfo gi ON gm.MemberGroupID = gi.GroupID
INNER JOIN PortfolioManager.dbo.GroupType gt ON gi.GroupType = gt.GroupTypeID
INNER JOIN PortfolioManager.dbo.AccountMember am ON gm.MemberGroupID = am.GroupID
INNER JOIN Customer.dbo.Account acc ON am.AccountId = acc.AccountId AND am.AccountLocationCode = acc.AccountLocationCode
INNER JOIN @reps reps ON acc.RepID = reps.RepID
INNER JOIN Customer.dbo.AccountLocation loc ON am.AccountLocationCode = loc.AccountLocationCode
LEFT JOIN Support.dbo.AccountClass acls ON acc.AccountClassCode = acls.Code
LEFT JOIN Customer.dbo.MFVASponsor mfvs ON acc.SponsorCode = mfvs.SponsorCode AND acc.SponsorType = mfvs.SponsorType
WHERE
gm.GroupID = @GroupID
AND (@IsPortfolioManager = 1 OR acc.AccountLocationCode <> 16)
AND (@FirmID = 1 OR acc.AccountLocationCode IN (1,2))
AND (acc.AccountLocationCode NOT IN (4, 128, 2048) OR acc.suppress IS NULL OR acc.suppress = 0)
-- Ensure that any interim child groups actually exist in GroupInfo (unknown why they would be orphaned, but it happens apparently)
AND EXISTS (SELECT * FROM PortfolioManager.dbo.GroupInfo gi WHERE gi.GroupID = gm.MemberGroupID)'
END
-- If records were found, return immediately
IF @@ROWCOUNT > 0 RETURN 2
-- 2 or 3 Deep (User Defined groups only)
IF @GroupType = 4
BEGIN
set @SQL3='SELECT
acc.AccountId,
acc.AccountLocationCode,
loc.AccountLocationShortName,
acc.RepId,
acc.AccountNo,
acc.SponsorAccountNo,
(CASE WHEN acc.AccountLocationCode IN (1, 2) THEN acc.AccountNo ELSE acc.SponsorAccountNo END) AS AccountNo,
(CASE WHEN acc.AccountLocationCode IN (1, 2) THEN SUBSTRING(acc.AccountNo, 1, 4) + ''-'' + SUBSTRING(acc.AccountNo, 5, 4) ELSE acc.SponsorAccountNo END) AS AccountNoDisplay,
(CASE WHEN acc.AccountLocationCode IN (1, 2) THEN acls.ShortName ELSE mfvs.SponsorName END) AS AccountClassOrFamily,
(CASE WHEN acc.AccountLocationCode IN (1, 2) THEN acc.AccountClassCode ELSE acc.SponsorCode END) AS AccountClassOrFamilyCode,
acc.SponsorCode,
acc.Cusip,
acc.ProductName,
acc.SSNTaxId,
acc.IsSSN,
acc.PrimaryBirthDate,
acc.AccountName,
acc.AccountTitle,
acc.IsClosed,
acc.TotalAccountValue,
acc.AccountValue,
acc.OutsideAccountValue,
(CASE WHEN acc.AccountLocationCode IN (1,2) THEN acc.AccountValue WHEN acc.AccountLocationCode = 16 THEN acc.OutsideAccountValue ELSE acc.TotalAccountValue END) AS AccountValue,
(CASE WHEN acc.AccountLocationCode IN (1,2) THEN acc.OutsideAccountValue ELSE 0 END) AS NetworkedValue,
acc.NetworkedAccountID,
(CASE WHEN acls.MFTradingEligible = ''Y'' AND RTRIM(acc.AccountClassCode) NOT LIKE ''%IS'' THEN ''Y'' ELSE ''N'' END) AS MFTradingEligible,
acls.EquityTradingEligible,
acls.OptionTradingEligible,
acls.FixedIncomeTradingEligible,
gt.Description AS MemberType
FROM
PortfolioManager.dbo.GroupMember gm
INNER JOIN PortfolioManager.dbo.GroupInfo gi ON gm.MemberGroupID = gi.GroupID
INNER JOIN PortfolioManager.dbo.GroupType gt ON gi.GroupType = gt.GroupTypeID
INNER JOIN PortfolioManager.dbo.AccountMember am ON gm.MemberGroupID = am.GroupID
INNER JOIN Customer.dbo.Account acc ON am.AccountId = acc.AccountId AND am.AccountLocationCode = acc.AccountLocationCode
INNER JOIN @reps reps ON acc.RepID = reps.RepID
INNER JOIN Customer.dbo.AccountLocation loc ON am.AccountLocationCode = loc.AccountLocationCode
LEFT JOIN Support.dbo.AccountClass acls ON acc.AccountClassCode = acls.Code
LEFT JOIN Customer.dbo.MFVASponsor mfvs ON acc.SponsorCode = mfvs.SponsorCode AND acc.SponsorType = mfvs.SponsorType
WHERE
gm.GroupID = @GroupID
AND (@IsPortfolioManager = 1 OR acc.AccountLocationCode <> 16)
AND (@FirmID = 1 OR acc.AccountLocationCode IN (1,2))
AND (acc.AccountLocationCode NOT IN (4, 128, 2048) OR acc.suppress IS NULL OR acc.suppress = 0)
-- Ensure that any interim child groups actually exist in GroupInfo (unknown why they would be orphaned, but it happens apparently)
AND EXISTS (SELECT * FROM PortfolioManager.dbo.GroupInfo gi WHERE gi.GroupID = gm.MemberGroupID)
UNION ALL
SELECT
acc.AccountId,
acc.AccountLocationCode,
loc.AccountLocationShortName,
acc.RepId,
acc.AccountNo,
acc.SponsorAccountNo,
(CASE WHEN acc.AccountLocationCode IN (1, 2) THEN acc.AccountNo ELSE acc.SponsorAccountNo END) AS AccountNo,
(CASE WHEN acc.AccountLocationCode IN (1, 2) THEN SUBSTRING(acc.AccountNo, 1, 4) + ''-'' + SUBSTRING(acc.AccountNo, 5, 4) ELSE acc.SponsorAccountNo END) AS AccountNoDisplay,
(CASE WHEN acc.AccountLocationCode IN (1, 2) THEN acls.ShortName ELSE mfvs.SponsorName END) AS AccountClassOrFamily,
(CASE WHEN acc.AccountLocationCode IN (1, 2) THEN acc.AccountClassCode ELSE acc.SponsorCode END) AS AccountClassOrFamilyCode,
acc.SponsorCode,
acc.Cusip,
acc.ProductName,
acc.SSNTaxId,
acc.IsSSN,
acc.PrimaryBirthDate,
acc.AccountName,
acc.AccountTitle,
acc.IsClosed,
acc.TotalAccountValue,
acc.AccountValue,
acc.OutsideAccountValue,
(CASE WHEN acc.AccountLocationCode IN (1,2) THEN acc.AccountValue WHEN acc.AccountLocationCode = 16 THEN acc.OutsideAccountValue ELSE acc.TotalAccountValue END) AS AccountValue,
(CASE WHEN acc.AccountLocationCode IN (1,2) THEN acc.OutsideAccountValue ELSE 0 END) AS NetworkedValue,
acc.NetworkedAccountID,
(CASE WHEN acls.MFTradingEligible = ''Y'' AND RTRIM(acc.AccountClassCode) NOT LIKE ''%IS'' THEN ''Y'' ELSE ''N'' END) AS MFTradingEligible,
acls.EquityTradingEligible,
acls.OptionTradingEligible,
acls.FixedIncomeTradingEligible,
''Household'' AS MemberType
FROM
PortfolioManager.dbo.GroupMember ggm
INNER JOIN PortfolioManager.dbo.GroupMember gm ON ggm.MemberGroupID = gm.GroupID
INNER JOIN PortfolioManager.dbo.AccountMember am ON gm.MemberGroupID = am.GroupID
INNER JOIN Customer.dbo.Account acc ON am.AccountId = acc.AccountId AND am.AccountLocationCode = acc.AccountLocationCode
INNER JOIN @reps reps ON acc.RepID = reps.RepID
INNER JOIN Customer.dbo.AccountLocation loc ON am.AccountLocationCode = loc.AccountLocationCode
LEFT JOIN Support.dbo.AccountClass acls ON acc.AccountClassCode = acls.Code
LEFT JOIN Customer.dbo.MFVASponsor mfvs ON acc.SponsorCode = mfvs.SponsorCode AND acc.SponsorType = mfvs.SponsorType
WHERE
ggm.GroupID = @GroupID
AND (@IsPortfolioManager = 1 OR acc.AccountLocationCode <> 16)
AND (@FirmID = 1 OR acc.AccountLocationCode IN (1,2))
AND (acc.AccountLocationCode NOT IN (4, 128, 2048) OR acc.suppress IS NULL OR acc.suppress = 0)
-- Ensure that any interim child groups actually exist in GroupInfo (unknown why they would be orphaned, but it happens apparently)
AND EXISTS (SELECT * FROM PortfolioManager.dbo.GroupInfo gi WHERE gi.GroupID = gm.MemberGroupID)
AND EXISTS (SELECT * FROM PortfolioManager.dbo.GroupInfo gi WHERE gi.GroupID = ggm.MemberGroupID)'
END
-- If records were found, return immediately
IF @@ROWCOUNT > 0 RETURN 3
END
-- No records were found - group is empty
RETURN 0
END
ELSE
BEGIN
-- THE FOLLOWING QUERIES ARE FOR EMPLOYEES ONLY --
-- These have no RepID join (and therefore no access restriction
-- These queries must remain identical to those above, but without the JOIN to a list of reps.
IF @GroupType IN (1,2,4)
BEGIN
-- 1 Deep
set @SQL4='SELECT
acc.AccountId,
acc.AccountLocationCode,
loc.AccountLocationShortName,
acc.RepId,
acc.AccountNo,
acc.SponsorAccountNo,
(CASE WHEN acc.AccountLocationCode IN (1, 2) THEN acc.AccountNo ELSE acc.SponsorAccountNo END) AS AccountNo,
(CASE WHEN acc.AccountLocationCode IN (1, 2) THEN SUBSTRING(acc.AccountNo, 1, 4) + ''-'' + SUBSTRING(acc.AccountNo, 5, 4) ELSE acc.SponsorAccountNo END) AS AccountNoDisplay,
(CASE WHEN acc.AccountLocationCode IN (1, 2) THEN acls.ShortName ELSE mfvs.SponsorName END) AS AccountClassOrFamily,
(CASE WHEN acc.AccountLocationCode IN (1, 2) THEN acc.AccountClassCode ELSE acc.SponsorCode END) AS AccountClassOrFamilyCode,
acc.SponsorCode,
acc.Cusip,
acc.ProductName,
acc.SSNTaxId,
acc.IsSSN,
acc.PrimaryBirthDate,
acc.AccountName,
acc.AccountTitle,
acc.IsClosed,
acc.TotalAccountValue,
acc.AccountValue,
acc.OutsideAccountValue,
(CASE WHEN acc.AccountLocationCode IN (1,2) THEN acc.AccountValue WHEN acc.AccountLocationCode = 16 THEN acc.OutsideAccountValue ELSE acc.TotalAccountValue END) AS AccountValue,
(CASE WHEN acc.AccountLocationCode IN (1,2) THEN acc.OutsideAccountValue ELSE 0 END) AS NetworkedValue,
acc.NetworkedAccountID,
(CASE WHEN acls.MFTradingEligible = ''Y'' AND RTRIM(acc.AccountClassCode) NOT LIKE ''%IS'' THEN ''Y'' ELSE ''N'' END) AS MFTradingEligible,
acls.EquityTradingEligible,
acls.OptionTradingEligible,
acls.FixedIncomeTradingEligible,
''Account'' AS MemberType
FROM
PortfolioManager.dbo.AccountMember am
INNER JOIN Customer.dbo.Account acc ON am.AccountId = acc.AccountId AND am.AccountLocationCode = acc.AccountLocationCode
INNER JOIN Customer.dbo.AccountLocation loc ON am.AccountLocationCode = loc.AccountLocationCode
LEFT JOIN Support.dbo.AccountClass acls ON acc.AccountClassCode = acls.Code
LEFT JOIN Customer.dbo.MFVASponsor mfvs ON acc.SponsorCode = mfvs.SponsorCode AND acc.SponsorType = mfvs.SponsorType
WHERE
am.GroupID = @GroupID
AND acc.RepId <> ''????''
AND (@IsPortfolioManager = 1 OR acc.AccountLocationCode <> 16)
AND (acc.AccountLocationCode NOT IN (4, 128, 2048) OR acc.suppress IS NULL OR acc.suppress = 0)'
END
-- If records were found, return immediately
IF @@ROWCOUNT > 0 RETURN 1
-- 2 Deep (Household only - User Defined groups are handled below)
IF @GroupType = 2
BEGIN
set @SQL5='SELECT
acc.AccountId,
acc.AccountLocationCode,
loc.AccountLocationShortName,
acc.RepId,
acc.AccountNo,
acc.SponsorAccountNo,
(CASE WHEN acc.AccountLocationCode IN (1, 2) THEN acc.AccountNo ELSE acc.SponsorAccountNo END) AS AccountNo,
(CASE WHEN acc.AccountLocationCode IN (1, 2) THEN SUBSTRING(acc.AccountNo, 1, 4) + ''-'' + SUBSTRING(acc.AccountNo, 5, 4) ELSE acc.SponsorAccountNo END) AS AccountNoDisplay,
(CASE WHEN acc.AccountLocationCode IN (1, 2) THEN acls.ShortName ELSE mfvs.SponsorName END) AS AccountClassOrFamily,
(CASE WHEN acc.AccountLocationCode IN (1, 2) THEN acc.AccountClassCode ELSE acc.SponsorCode END) AS AccountClassOrFamilyCode,
acc.SponsorCode,
acc.Cusip,
acc.ProductName,
acc.SSNTaxId,
acc.IsSSN,
acc.PrimaryBirthDate,
acc.AccountName,
acc.AccountTitle,
acc.IsClosed,
acc.TotalAccountValue,
acc.AccountValue,
acc.OutsideAccountValue,
(CASE WHEN acc.AccountLocationCode IN (1,2) THEN acc.AccountValue WHEN acc.AccountLocationCode = 16 THEN acc.OutsideAccountValue ELSE acc.TotalAccountValue END) AS AccountValue,
(CASE WHEN acc.AccountLocationCode IN (1,2) THEN acc.OutsideAccountValue ELSE 0 END) AS NetworkedValue,
acc.NetworkedAccountID,
(CASE WHEN acls.MFTradingEligible = ''Y'' AND RTRIM(acc.AccountClassCode) NOT LIKE ''%IS'' THEN ''Y'' ELSE ''N'' END) AS MFTradingEligible,
acls.EquityTradingEligible,
acls.OptionTradingEligible,
acls.FixedIncomeTradingEligible,
gt.Description AS MemberType
FROM
PortfolioManager.dbo.GroupMember gm
INNER JOIN PortfolioManager.dbo.GroupInfo gi ON gm.MemberGroupID = gi.GroupID
INNER JOIN PortfolioManager.dbo.GroupType gt ON gi.GroupType = gt.GroupTypeID
INNER JOIN PortfolioManager.dbo.AccountMember am ON gm.MemberGroupID = am.GroupID
INNER JOIN Customer.dbo.Account acc ON am.AccountId = acc.AccountId AND am.AccountLocationCode = acc.AccountLocationCode
INNER JOIN Customer.dbo.AccountLocation loc ON am.AccountLocationCode = loc.AccountLocationCode
LEFT JOIN Support.dbo.AccountClass acls ON acc.AccountClassCode = acls.Code
LEFT JOIN Customer.dbo.MFVASponsor mfvs ON acc.SponsorCode = mfvs.SponsorCode AND acc.SponsorType = mfvs.SponsorType
WHERE
gm.GroupID = @GroupID
AND acc.RepId <> ''????''
AND (@IsPortfolioManager = 1 OR acc.AccountLocationCode <> 16)
AND (acc.AccountLocationCode NOT IN (4, 128, 2048) OR acc.suppress IS NULL OR acc.suppress = 0)
-- Ensure that any interim child groups actually exist in GroupInfo (unknown why they would be orphaned, but it happens apparently)
AND EXISTS (SELECT * FROM PortfolioManager.dbo.GroupInfo gi WHERE gi.GroupID = gm.MemberGroupID)'
END
-- If records were found, return immediately
IF @@ROWCOUNT > 0 RETURN 2
-- 2 or 3 Deep (User Defined groups only)
IF @GroupType = 4
BEGIN
set @SQL6='SELECT
acc.AccountId,
acc.AccountLocationCode,
loc.AccountLocationShortName,
acc.RepId,
acc.AccountNo,
acc.SponsorAccountNo,
(CASE WHEN acc.AccountLocationCode IN (1, 2) THEN acc.AccountNo ELSE acc.SponsorAccountNo END) AS AccountNo,
(CASE WHEN acc.AccountLocationCode IN (1, 2) THEN SUBSTRING(acc.AccountNo, 1, 4) + ''-'' + SUBSTRING(acc.AccountNo, 5, 4) ELSE acc.SponsorAccountNo END) AS AccountNoDisplay,
(CASE WHEN acc.AccountLocationCode IN (1, 2) THEN acls.ShortName ELSE mfvs.SponsorName END) AS AccountClassOrFamily,
(CASE WHEN acc.AccountLocationCode IN (1, 2) THEN acc.AccountClassCode ELSE acc.SponsorCode END) AS AccountClassOrFamilyCode,
acc.SponsorCode,
acc.Cusip,
acc.ProductName,
acc.SSNTaxId,
acc.IsSSN,
acc.PrimaryBirthDate,
acc.AccountName,
acc.AccountTitle,
acc.IsClosed,
acc.TotalAccountValue,
acc.AccountValue,
acc.OutsideAccountValue,
(CASE WHEN acc.AccountLocationCode IN (1,2) THEN acc.AccountValue WHEN acc.AccountLocationCode = 16 THEN acc.OutsideAccountValue ELSE acc.TotalAccountValue END) AS AccountValue,
(CASE WHEN acc.AccountLocationCode IN (1,2) THEN acc.OutsideAccountValue ELSE 0 END) AS NetworkedValue,
acc.NetworkedAccountID,
(CASE WHEN acls.MFTradingEligible = ''Y'' AND RTRIM(acc.AccountClassCode) NOT LIKE ''%IS'' THEN ''Y'' ELSE ''N'' END) AS MFTradingEligible,
acls.EquityTradingEligible,
acls.OptionTradingEligible,
acls.FixedIncomeTradingEligible,
gt.Description AS MemberType
FROM
PortfolioManager.dbo.GroupMember gm
INNER JOIN PortfolioManager.dbo.GroupInfo gi ON gm.MemberGroupID = gi.GroupID
INNER JOIN PortfolioManager.dbo.GroupType gt ON gi.GroupType = gt.GroupTypeID
INNER JOIN PortfolioManager.dbo.AccountMember am ON gm.MemberGroupID = am.GroupID
INNER JOIN Customer.dbo.Account acc ON am.AccountId = acc.AccountId AND am.AccountLocationCode = acc.AccountLocationCode
INNER JOIN Customer.dbo.AccountLocation loc ON am.AccountLocationCode = loc.AccountLocationCode
LEFT JOIN Support.dbo.AccountClass acls ON acc.AccountClassCode = acls.Code
LEFT JOIN Customer.dbo.MFVASponsor mfvs ON acc.SponsorCode = mfvs.SponsorCode AND acc.SponsorType = mfvs.SponsorType
WHERE
gm.GroupID = @GroupID
AND acc.RepId <> ''????''
AND (@IsPortfolioManager = 1 OR acc.AccountLocationCode <> 16)
AND (acc.AccountLocationCode NOT IN (4, 128, 2048) OR acc.suppress IS NULL OR acc.suppress = 0)
-- Ensure that any interim child groups actually exist in GroupInfo (unknown why they would be orphaned, but it happens apparently)
AND EXISTS (SELECT * FROM PortfolioManager.dbo.GroupInfo gi WHERE gi.GroupID = gm.MemberGroupID)
UNION ALL
SELECT
acc.AccountId,
acc.AccountLocationCode,
loc.AccountLocationShortName,
acc.RepId,
acc.AccountNo,
acc.SponsorAccountNo,
(CASE WHEN acc.AccountLocationCode IN (1, 2) THEN acc.AccountNo ELSE acc.SponsorAccountNo END) AS AccountNo,
(CASE WHEN acc.AccountLocationCode IN (1, 2) THEN SUBSTRING(acc.AccountNo, 1, 4) + '-' + SUBSTRING(acc.AccountNo, 5, 4) ELSE acc.SponsorAccountNo END) AS AccountNoDisplay,
(CASE WHEN acc.AccountLocationCode IN (1, 2) THEN acls.ShortName ELSE mfvs.SponsorName END) AS AccountClassOrFamily,
(CASE WHEN acc.AccountLocationCode IN (1, 2) THEN acc.AccountClassCode ELSE acc.SponsorCode END) AS AccountClassOrFamilyCode,
acc.SponsorCode,
acc.Cusip,
acc.ProductName,
acc.SSNTaxId,
acc.IsSSN,
acc.PrimaryBirthDate,
acc.AccountName,
acc.AccountTitle,
acc.IsClosed,
acc.TotalAccountValue,
acc.AccountValue,
acc.OutsideAccountValue,
(CASE WHEN acc.AccountLocationCode IN (1,2) THEN acc.AccountValue WHEN acc.AccountLocationCode = 16 THEN acc.OutsideAccountValue ELSE acc.TotalAccountValue END) AS AccountValue,
(CASE WHEN acc.AccountLocationCode IN (1,2) THEN acc.OutsideAccountValue ELSE 0 END) AS NetworkedValue,
acc.NetworkedAccountID,
(CASE WHEN acls.MFTradingEligible = ''Y'' AND RTRIM(acc.AccountClassCode) NOT LIKE ''%IS'' THEN ''Y'' ELSE ''N'' END) AS MFTradingEligible,
acls.EquityTradingEligible,
acls.OptionTradingEligible,
acls.FixedIncomeTradingEligible,
''Household'' AS MemberType
FROM
PortfolioManager.dbo.GroupMember ggm
INNER JOIN PortfolioManager.dbo.GroupMember gm ON ggm.MemberGroupID = gm.GroupID
INNER JOIN PortfolioManager.dbo.AccountMember am ON gm.MemberGroupID = am.GroupID
INNER JOIN Customer.dbo.Account acc ON am.AccountId = acc.AccountId AND am.AccountLocationCode = acc.AccountLocationCode
INNER JOIN Customer.dbo.AccountLocation loc ON am.AccountLocationCode = loc.AccountLocationCode
LEFT JOIN Support.dbo.AccountClass acls ON acc.AccountClassCode = acls.Code
LEFT JOIN Customer.dbo.MFVASponsor mfvs ON acc.SponsorCode = mfvs.SponsorCode AND acc.SponsorType = mfvs.SponsorType
WHERE
ggm.GroupID = @GroupID
AND acc.RepId <> ''????''
AND (@IsPortfolioManager = 1 OR acc.AccountLocationCode <> 16)
AND (acc.AccountLocationCode NOT IN (4, 128, 2048) OR acc.suppress IS NULL OR acc.suppress = 0)
-- Ensure that any interim child groups actually exist in GroupInfo (unknown why they would be orphaned, but it happens apparently)
AND EXISTS (SELECT * FROM PortfolioManager.dbo.GroupInfo gi WHERE gi.GroupID = gm.MemberGroupID)
AND EXISTS (SELECT * FROM PortfolioManager.dbo.GroupInfo gi WHERE gi.GroupID = ggm.MemberGroupID)'
-- If records were found, return immediately
IF @@ROWCOUNT > 0 RETURN 3
-- No records were found - group is empty
RETURN 0
END
END
GO
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
EXEC (@SQL1+@SQL2+@SQL3+@SQL4+@SQL5+@SQL6)
IF @Debug = 1
BEGIN
PRINT ISNULL(@SQL1,'NO SQL!')
PRINT ISNULL(@SQL2,'NO SQL!')
PRINT ISNULL(@SQL3,'NO SQL!')
PRINT ISNULL(@SQL4,'NO SQL!')
PRINT ISNULL(@SQL5,'NO SQL!')
PRINT ISNULL(@SQL6,'NO SQL!')
END
December 21, 2007 at 2:01 pm
I posted SP. Can you please take a look.
December 21, 2007 at 2:22 pm
Take this lot out from just before the exec. The GO breaks the batch and afterwards, the SQL1... variables are not defined.
GO
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
Gail Shaw
Microsoft Certified Master: SQL Server, MVP, M.Sc (Comp Sci)
SQL In The Wild: Discussions on DB performance with occasional diversions into recoverability
December 21, 2007 at 2:32 pm
Edit. I need to read better.
A better way to debug than mess with dynamic SQL, which in this case is going to cause errors that didn't exist before, is to take the queries and run them one by one in QA/Management studio.
Just declare the necessary variables, and run the queries alone.
Gail Shaw
Microsoft Certified Master: SQL Server, MVP, M.Sc (Comp Sci)
SQL In The Wild: Discussions on DB performance with occasional diversions into recoverability
Viewing 7 posts - 1 through 6 (of 6 total)
You must be logged in to reply to this topic. Login to reply