group records by week

Question

Post reply

group records by week

Bruin

SSCrazy

Points: 2071
More actions
January 28, 2022 at 2:18 pm
Go to Answer
#3978358
I have a table , and I want to have a query that shows by week how many records are being created.
I'm trying to pull the value from t_stamp like this just to see the value.
SELECT dateadd(S, t_stamp, '1970-01-01 00:00:00')
FROM
#dataCapture
Arithmetic overflow error converting expression to data type int.
Insert Into #datacapture
Values(4, NULL, 15.8773460388184, NULL, NULL, 192,1641918620183)
Thanks
```
CREATE TABLE [dbo].[#dataCapture](
[tagid] [int] NOT NULL,
[intvalue] [bigint] NULL,
[floatvalue] [float] NULL,
[stringvalue] [nvarchar](255) NULL,
[datevalue] [datetime] NULL,
[dataintegrity] [int] NULL,
[t_stamp] [bigint] NOT NULL,
PRIMARY KEY CLUSTERED 
(
[tagid] ASC,
[t_stamp] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
```

Viewing 15 posts - 1 through 15 (of 64 total)

You must be logged in to reply to this topic. Login to reply

Mike01 SSChampion Points: 11395 More actions · Answer 1

The DateAdd function is failing. The increment parameter is an int and you are passing in a bigint

For better, quicker answers, click on the following...
http://www.sqlservercentral.com/articles/Best+Practices/61537/

For better answers on performance questions, click on the following...
http://www.sqlservercentral.com/articles/SQLServerCentral/66909/

Bruin SSCrazy Points: 2071 More actions · Answer 2

Thats my problem not sure how to make it work along with the grouping

Thx.

Phil Parkin SSC Guru Points: 246987 More actions · Answer 3

You have provided an error message, but not asked any questions.

The absence of evidence is not evidence of absence.
Martin Rees

You can lead a horse to water, but a pencil must be lead.
Stan Laurel

Bruin SSCrazy Points: 2071 More actions · Answer 4

I have it displaying datetime now, how can I get it grouped by week? and a COunt.

SELECT *, CONCAT
  ( 
   CAST(DATEADD(SECOND, t_stamp/1000 ,'1970/1/1') AS DATE) 
  ,' ' 
  ,CAST(DATEADD(SECOND, t_stamp/1000 ,'1970/1/1') AS TIME)
  )myDate

This reply was modified 2 years, 11 months ago by Bruin.

DesNorton SSC-Insane Points: 24401 More actions · Answer 5

I suspect that part of the problem is identifying what the value in t_stamp means.

From your query, it appears that you are assuming it to be the number of seconds that have elapsed since 1 Jan 1970.

There are 604800 in a week (86400 * 7).

So, 1641918620183 / 604800 is roughly 2714812 weeks, or roughly 52207 years.

Now, assuming that the value in t_stamp is actually milliseconds since 1 Jan 1970, the following code seems to do the trick

CREATE TABLE #dataCapture (
    tagid         int           NOT NULL
  , intvalue      bigint            NULL
  , floatvalue    float             NULL
  , stringvalue   nvarchar(255)     NULL
  , datevalue     datetime          NULL
  , dataintegrity int               NULL
  , t_stamp       bigint        NOT NULL
  , PRIMARY KEY CLUSTERED ( tagid ASC, t_stamp ASC ));
GO

INSERT INTO #dataCapture ( tagid, intvalue, floatvalue, stringvalue, datevalue, dataintegrity, t_stamp )
VALUES ( 4, NULL, 15.8773460388184, NULL, NULL, 192,1641918620183 );

SELECT *
  , dt_stamp  = DATEADD(SECOND, CAST( (t_stamp % 604800000) AS int ), DATEADD(WEEK, CAST( (t_stamp / 604800000) AS int ), CONVERT(datetime, '1970-01-01 00:00:00', 120) ))
FROM #dataCapture AS dc

DROP TABLE #dataCapture;

How to post data/code on a forum to get the best help.

DesNorton SSC-Insane Points: 24401 More actions · Answer 6

A simplified query to return dateStamp as datetime, and wkStamp as 1st day of teh week.

You can then use the value in wk_stamp to do your grouping by

SELECT *
  , dt_stamp = DATEADD(SECOND, CAST( (t_stamp / 1000) AS int ), CONVERT(datetime, '1970-01-01 00:00:00', 120) )
  , wk_stamp = DATEADD(dd, DATEDIFF(dd, 0, DATEADD(SECOND, CAST( (t_stamp / 1000) AS int ), CONVERT(datetime, '1970-01-01 00:00:00', 120) )) /7 *7, 0)
FROM #dataCapture AS dc

How to post data/code on a forum to get the best help.

Bruin SSCrazy Points: 2071 More actions · Answer 7

Thanks the above query worked great. If I wanted to do a daily extract of records saying start at 00:00 to 11:59 how would that query look?

Thx.

Bruin SSCrazy Points: 2071 More actions · Answer 8

I like to use a parm to pass in like @date then the query dumps the data from the table to a (csv) file that is pipe delimited.

Can this be achived?

Thx.

Jeff Moden SSC Guru Points: 1004410 More actions · Answer 9

Bruin wrote:

Thanks the above query worked great. If I wanted to do a daily extract of records saying start at 00:00 to 11:59 how would that query look?
Thx.

What does that have to do with grouping "records" are crated by week???

And what day of the week does your week start on?

--Jeff Moden

RBAR is pronounced "ree-bar" and is a "Modenism" for Row-By-Agonizing-Row.
First step towards the paradigm shift of writing Set Based code:
________Stop thinking about what you want to do to a ROW... think, instead, of what you want to do to a COLUMN.

Change is inevitable... Change for the better is not.

Helpful Links:
How to post code problems
How to Post Performance Problems
Create a Tally Function (fnTally)

Bruin SSCrazy Points: 2071 More actions · Answer 10

I was getting and idea of how many records are accumulating for a week, and trying to figure out how to read the data.

Now the request has shifted to pull previous days records to a file which will be used in another process yet to get created.

Thanks.

Jeffrey Williams SSC Guru Points: 90305 More actions · Answer 11

Bruin wrote:

Thanks the above query worked great. If I wanted to do a daily extract of records saying start at 00:00 to 11:59 how would that query look?

Since the data is stored as a bigint in the table, the best way of filtering that data is to calculate the starting value and ending value of the range of 'dates' you want.

For example:

Declare @current_date datetime = '2022-01-12 10:22:21.183';

Declare @ts_start bigint = datediff_big(ms, '1970-01-01 00:00:00.000', cast(@current_date - 1 As date))
      , @ts_end bigint = datediff_big(ms, '1970-01-01 00:00:00.000', cast(@current_date As date))
 
 Select @ts_start, @ts_end;

Then filter in the where clause as:

WHERE ts_stamp >= @ts_start
  AND ts_stamp <  @ts_end

It appears the value you have in ts_stamp is the number of milliseconds since 1970-01-01. To convert that value to the correct date/time with millisecond accuracy would be:

Declare @myDate datetime;
 Select date_ss = dateadd(second, 1641918620183 / 1000, '1970-01-01')
      , date_ms = dateadd(millisecond, 1641918620183 % 1000, dateadd(second, 1641918620183 / 1000, '1970-01-01'))

With that said - I would create a persisted computed column on the table and index that column using the formula above. Once you have that column you can then query the column with normal date filtering.

Note: you also need to verify that the source of the data is sending you that data in the same time zone. If they are sending the data as UTC then you would need to account for that in your conversion.

This reply was modified 2 years, 11 months ago by Jeffrey Williams.
This reply was modified 2 years, 11 months ago by Jeffrey Williams.

Jeffrey Williams
“We are all faced with a series of great opportunities brilliantly disguised as impossible situations.”

― Charles R. Swindoll

How to post questions to get better answers faster
Managing Transaction Logs

Bruin SSCrazy Points: 2071 More actions · Answer 12

I'm a little confused by:

Declare @current_date datetime = '2022-01-12 10:22:21.183';

Declare @ts_startbigint = datediff_big(ms, '1970-01-01 00:00:00.000', cast(@current_date - 1 As date))

, @ts_endbigint = datediff_big(ms, '1970-01-01 00:00:00.000', cast(@current_date As date))

Select @ts_start, @ts_end;

--

Msg 102, Level 15, State 1, Line 3

Incorrect syntax near '='.

Msg 137, Level 15, State 2, Line 6

Must declare the scalar variable "@ts_start".

Bruin SSCrazy Points: 2071 More actions · Answer 13

What if it has to be retro-fitted to SQL 2012 is datediff_big available?

Thanks for your help.

This reply was modified 2 years, 11 months ago by Bruin.

Bruin SSCrazy Points: 2071 More actions · Answer 14

This is getting 1-day of information, can be it done more efficient?

SELECT count(*)
  , dt_stamp = convert(date,DATEADD(SECOND, CAST( (t_stamp / 1000) AS int ), CONVERT(datetime, '1970-01-01 00:00:00', 120) ))
FROM  sqlt_data_1_2022_01(nolock) AS dc
where
convert(date,DATEADD(SECOND, CAST( (t_stamp / 1000) AS int ), CONVERT(datetime, '1970-01-01 00:00:00', 120) )) = '2022/01/01'
group by convert(date,DATEADD(SECOND, CAST( (t_stamp / 1000) AS int ), CONVERT(datetime, '1970-01-01 00:00:00', 120) ))