March 3, 2009 at 9:56 pm
Hi r,
I want to add following code in SSIS pacakge in SQL TASK EDITOR.
----------------------------------------------------------------------------------------------
DECLARE @SQLCmd varchar(2000),@rtnCode int
@SETup_path ut_long_description,
@working_filename ut_long_description,
@working_filepath ut_long_description,
@batch_filename ut_long_description,
@share_map_drive ut_long_description,
@share_unc ut_long_description,
@share_user ut_long_description,
@share_pwd ut_long_description
SELECT @working_filepath =
CASE left(@@servername,1)
WHEN 'D' THEN 'D:\Report\DataDump\'
WHEN 'T' THEN 'D:\Report\DataDump\'
WHEN 'S' THEN 'T:\REPORT\DataDump\'
WHEN 'P' THEN 'T:\REPORT\DataDump\'
END,
@SETup_path =
CASE left(@@servername,1)
WHEN 'D' THEN 'D:\Report\DataDump\SETup\'
WHEN 'T' THEN 'D:\Report\DataDump\SETup\'
WHEN 'S' THEN 'T:\REPORT\DataDump\SETup\'
WHEN 'P' THEN 'T:\REPORT\DataDump\SETup\'
END,
@batch_filename =
CASE left(@@servername,1)
WHEN 'D' THEN 'D:\Report\DataDump\SETUp\movedump.bat'
WHEN 'T' THEN 'D:\Report\DataDump\SETUp\movedump.bat'
WHEN 'S' THEN 'T:\Report\DataDump\SETUp\movedump.bat'
WHEN 'P' THEN 'T:\Report\DataDump\SETUp\movedump.bat'
END,
@share_map_drive =
CASE left(@@servername,1)
WHEN 'D' THEN 'R:'
WHEN 'T' THEN 'R:'
WHEN 'S' THEN 'X:'
WHEN 'P' THEN 'B:'
END,
@share_unc =
CASE left(@@servername,1)
WHEN 'D' THEN '\\T2ADM01.machine.net\Dev'
WHEN 'T' THEN '\\T2ADM01.machine.net\Output'
WHEN 'S' THEN '\\S2ADM01.machine.net\Output'
WHEN 'P' THEN '\\10.10.220.20\Output'
END,
@share_user =
CASE left(@@servername,1)
WHEN 'D' THEN 'T2ADM01\datadump'
WHEN 'T' THEN 'T2ADM01\datadump'
WHEN 'S' THEN 'S2ADM01\cviiuser'
WHEN 'P' THEN 'HQFS01\DataDump'
END,
--@share_pwd = ''
@share_pwd =
CASE left(@@servername,1)
WHEN 'D' THEN 'password'
WHEN 'T' THEN 'password'
WHEN 'S' THEN 'H@Ogate'
WHEN 'P' THEN 'D@tadump'
END
EXEC @rtnCode = [dbo].[up_dmp_MoveDump]
@dump_q_id ,
@dump_q_xml ,
@working_filename ,
@batch_filename ,
@share_map_drive ,
@share_unc ,
@share_user ,
@share_pwd
----------------------------------------------------------------------------------------------------
I added this code into it but its giving error “Invalid SQL statement”
can any one tell how can i incorporate it in SSIS ???????
-------Bhuvnesh----------
I work only to learn Sql Server...though my company pays me for getting their stuff done;-)
March 4, 2009 at 5:46 am
My first thought is to build this as a stored procedure and just call it for the execute sql task.
You can use and ADO.NET connection type and set up the exectue sql task as a stored procedure. then you can map input and output params to package varaibles.
But, if you want to keep as direct input in the task I would first confirm that it works in management studio.
March 4, 2009 at 5:58 am
Hi
i build the package then i import it
but Whenever i m executing tha package from Integaration service environment ( "RUN Package)
it working FINE
but whenever i run belo wriiten query to run it its giving ERROR (shown below)
-----------------Query-------------------------------------
EXEC master..xp_cmdshell 'D:\Report\DataDump\SETup\dtexec.exe /DTS "\MSDB\SSIS_DataDump_event" /SERVER T2DBA03 /MAXCONCURRENT " -1 " /CHECKPOINTING OFF'
---------------------ERROR-----------------------------------------------------------------
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
NULL
Started: 7:44:21 AM
Error: 2009-03-04 07:44:22.37
Code: 0xC0016016
Source:
Description: Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that
the correct key is available.
End Error
Progress: 2009-03-04 07:44:23.79
Source: Data Flow Task
Validating: 0% complete
End Progress
Progress: 2009-03-04 07:44:23.80
Source: Data Flow Task
Validating: 10% complete
End Progress
Error: 2009-03-04 07:44:23.88
Code: 0xC0202009
Source: SSIS_DataDump_Event Connection manager "SourceConnectionOLEDB"
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E4D.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E4D Description: "Login failed for user 'sa'.".
End Error
Error: 2009-03-04 07:44:23.88
Code: 0xC020801C
Source: Data Flow Task Source 8 - dmp_event_group_item_detail [920]
Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "SourceConnectionOLEDB" failed with error code 0xC0202009. There may be error messages posted before this wit
h more information on why the AcquireConnection method call failed.
End Error
Error: 2009-03-04 07:44:23.88
Code: 0xC0047017
Source: Data Flow Task DTS.Pipeline
Description: component "Source 8 - dmp_event_group_item_detail" (920) failed validation and returned error code 0xC020801C.
End Error
Progress: 2009-03-04 07:44:23.88
Source: Data Flow Task
Validating: 20% complete
End Progress
Error: 2009-03-04 07:44:23.88
Code: 0xC004700C
Source: Data Flow Task DTS.Pipeline
Description: One or more component failed validation.
End Error
Error: 2009-03-04 07:44:23.88
Code: 0xC0024107
Source: Data Flow Task
Description: There were errors during task validation.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 7:44:21 AM
Finished: 7:44:23 AM
Elapsed: 2.484 seconds
NULL
-------Bhuvnesh----------
I work only to learn Sql Server...though my company pays me for getting their stuff done;-)
Viewing 3 posts - 1 through 2 (of 2 total)
You must be logged in to reply to this topic. Login to reply